AT&T DLP73390 - Call Screening

149
Answering system
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard over the
telephone base when they are being recorded. If you turn call screening on, you
hear the incoming message.
To turn on or o the call screening feature:
Using a cordless handset:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Answering sys, then press
MENU/SELECT .
3. Press CID or DIR to highlight Ans sys setup, then press
MENU/SELECT twice to select Call screening.
4. Press CID or DIR to choose between On and O, then
press MENU/SELECT to save.
Using the telephone base:
1. Press Menu sokey, and choose Answering system .
2. Press / to scroll to Call screening .
3. Press Turn ON or Turn OFF to choose.
CALL SCREENING
Status: ON
Back Turn OFF
Note: For more information on call screening, see page 156.
Call screening
ECO
On
ECO