AT&T DLP73390 - Change a One-To-One PTT Call to an Intercom Call; Answer an Incoming Call During a PTT Call

87
Multiple handset use
Push-to-talk (PTT)
Change a one-to-one PTT call to an intercom call
You can convert a one-to-one PTT session to an intercom call.
Using a cordless handset:
1. When your device shows Press [PTT] Talk, press MENU/SELECT. The screen
shows Intercom.
2. Press MENU/SELECT. Your device displays Calling base or Calling HS X. The
destination device shows HANDSET X is calling. The destination device
rings.
3. Press HOME/FLASH, CELL or /SPEAKER on the destination handset, or
press Answer on the telephone base to answer the intercom call.
4. To end the intercom call, press OFF/CANCEL on your handset or place the
handset in the telephone base or charger. Both screens show Intercom
ended.
Using the telephone base:
1. When your device shows Press and hold [PTT] to talk, press Intercom . The
screen shows PTT Ended and then Calling Handset X.
2. The destination device shows BASE 0 is calling. The destination device
rings.
3. Press HOME/FLASH, CELL or /SPEAKER on the destination handset to
answer the intercom call.
4. To end the intercom call, press End on the telephone base. Both screens
show Intercom ended.
Answer an incoming call during a PTT call
When you receive an outside call during PTT, there is an alert tone.
f During a one-to-one PTT, press HOME/FLASH, CELL, or /SPEAKER on
the initiating or destination handset. The PTT call ends automatically and the
outside call is answered.
f During a one-to-group PTT call, press HOME/FLASH, CELL, or
/SPEAKER on the initiating handset, or End on the initiating telephone
base. The PTT call ends automatically and the outside call is answered.
f During a one-to-group PTT call, press HOME/FLASH on any one of the
destination handsets, or press /HOME or Answer on the destination
telephone base. That device answers the outside call. The PTT call continues
for the rest of the PTT participants.