AT&T DLP73390 - Key Tone; Use Caller ID to Automatically Set Date and Time

59
Telephone settings
Telephone base settings
Key tone
The telephone base is set to beep with each key press. You can adjust the key
tone volume or turn it o. If you turn o the key tone, there are no beeps when
you press keys.
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press or to scroll to the next page, and then press the Settings
smart key to enter.
3. Press Key tone .
4. Press VOL + or VOL - or the smart keys next to the sound bar ( - / + ).
5. Press Set to conrm.
MENU 2/2
Bluetooth
Set date / time
Smart key
Ringers
Settings
Access
voicemail
Previous
KEY TONE
Press [Vol +/-] or “+/-” key to adjust
Set
Use caller ID to automatically set date and time
If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. Follow the steps, as mentioned below, to
turn the CID time sync feature on or o. The default setting is On.
1. Press MENU on the telephone base in idle mode to enter the main menu.
2. Press or to scroll to the next page, and then press the Settings
smart key to enter.
MENU 2/2
Bluetooth
Set date / time
Smart key
Ringers
Settings
Access
voicemail
Previous
3. Press CID time syn .
4. Select between to turn on or to turn o, and then press Yes to
conrm or press No to return to previous page.