AT&T DLP73390 - Handset Locator

75
Telephone operation
Handset locator
This feature helps you nd a misplaced handset.
To start paging:
f Press FIND HS on the telephone base
when it is not in use. All idle handsets
ring and display
**
Paging
**
. The base LCD displays
Paging all devices.
To end paging:
f Press HOME/FLASH, CELL,
OFF/CANCEL or /SPEAKER on the
handset .
-OR-
f Press FIND HS again on the telephone
base.
-OR-
f Press on the telephone
base.
-OR-
f Press Stop on the telephone base.
-OR-
f Place the handset in the telephone
base or charger.
Notes:
f If you press MUTE/DELETE on a handset, the ringer of that handset is silenced but the paging tone continues on the
other handsets.
f If a handset is accessing the answering system, on a call (intercom call or outside call), or out of range, that handset
does not beep when paged.
f You cannot use the nd handset feature while the telephone base is playing messages or the answering system is
being accessed remotely.