AT&T DLP73390 - Activate Remote Voice Control

39
Bluetooth
Remote voice control
Activate remote voice control
Using the cordless handset:
1. Press MUTE/DELETE/VOICE.
f If you have connected two cell phones to the
telephone, the telephone shows Select a device:.
Press CID or DIR to highlight the desired device,
then press MENU/SELECT.
f If the activation fails, the telephone displays Not
available.
2. When the handset plays the conrmation tone as
forwarded by the cell phone’s voice app, start speaking
toward the handset, and then wait for feedback. Make
reply to the voice app’s feedback, if necessary.
f You can press /SPEAKER on the handset to turn o
the speakerphone and listen to the feedback through
the handset earpiece.
3. To end the current remote voice control session, press OFF/CANCEL on the
handset. You can restart by following Steps 1-2 mentioned above.
Using the telephone base:
1. Press MUTE/VOICE on the telephone base.
f If you have connected two cell phones to
the telephone, the telephone shows Select
a device:. Press CID or DIR to highlight the
desired device, then press MENU/SELECT.
f If the activation fails, the telephone displays Not
available.
2. When the telephone base plays the
conrmation tone as forwarded by the cell
phone’s voice app, start speaking toward the
telephone base, and then wait for feedback.
Make reply to the voice app’s feedback, if
necessary.
3. To end the current remote voice control session,
press on the telephone base. You
can restart by following Steps 1-2 mentioned
above.
Cell phone X 00:05
ECO
1
<Cell device name>
REMOTE VOICE CONTROL
Stop