AT&T DLP73390 - Page 26

19
Getting started
Battery installation and charging
IMPORTANT INFORMATION
f Use only the supplied rechargeable battery or replacement battery
(model BT162342/BT262342). To order, visit our website at
https://telephones.att.com or call 1 (800) 222-3111. In Canada,
dial 1 (866) 288-4268.
f If you do not use the handset for a long time, disconnect and remove the
battery to prevent possible leakage.
Aer you install your telephone or power returns following
a power outage, the handset and telephone base will
prompt you to set the date and time. For instructions, see
Set date/time on page 44. To skip setting the date
and time, press OFF/CANCEL on the handset or press
on the telephone base.
Aer the Smart call blocker setting is done or skipped, the telephone base will
then prompt if you want to set up the answering system. Press YES to start
the answering system setup via voice guide. For more details, see Voice guide
to set Answering system on page 148. To skip the setup, press on
the telephone base.
Aer the date and time setting is done or skipped, the telephone base will
prompt if you want to set Smart call blocker. Press YES to start the Smart call
blocker setup via voice guide. For more details, see Voice guide to set Smart
call blocker on page 137. To skip the setup, press twice on the
telephone base.
Date: MM/DD/YY
ECO
Time: HH:MM - -
ECO