81
Multiple handset use
Call transfer using intercom
Using the telephone base:
1. When on an outside call, press Intercom .
2. The call is automatically put on hold. Press / / / to select a device. The
screen shows Intercom and Calling Handset X (X represents the handset
number). The destination handset rings and shows Base is calling.
3. To answer the intercom call on the other device, press
HOME/FLASH,
CELL or /SPEAKER on
the destination handset.
T
he outside call is still
on hold. The base screen now shows Intercom with Handset X.
4. To transfer the call, press Transfer . The screen shows Call transferred. The
other handset automatically connects to the outside call.
- OR -
To share the outside call with another device, press Share call .
- OR -
Press End to end the intercom call. The outside call continues with the
telephone base.
Notes:
f If you want to cancel an intercom call and reconnect to the outside call before the destination handset answers, press
OFF/CANCEL on the originating handset or press End on the originating telephone base.
f If the called device does not answer the intercom call within 100 seconds, or if the device is in use, on a call or out of
range, the initiating telephone base displays No answer. Try again. or the initiating handset displays Unable
to call, and returns to the outside call.
f You can press OFF/CANCEL or MUTE/DELETE on the destination handset, or press Mute on the telephone
base to temporarily silence the intercom ringer.
f Only one intercom call can be established at a time.
To Next Page
Loading...
