Getting started
8
To replace the battery, press the tab and
slide the battery compartment cover
downwards. Li out the old battery and
disconnect it from the handset. Follow
the instructions to install and charge the
new battery.
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT162342/BT262342).
To order, visit our website at www.telephones.att.com or call
1 (800) 222-3111. In Canada, dial 1 (866) 288-4268.
Aer you install your telephone or power returns following
a power outage, the handset will prompt you to set the
date and time (see page 17). To skip setting the date and
time, press .
Date: MM/DD/YY
ECO
Voice guide to...
ECO
set up Ans sys?
ECO
Battery installation and charging
Aer the date and time setting is done or skipped, the
handset will prompt if you want to set up the answering
system. Press to start the answering system
setup via voice guide. For more details, see Voice guide
on page 55. To skip the setup, press on the
handset.
To Next Page
Loading...
