59
Answering system
Answering system settings
Message alert tone
When the message alert tone is on, and there is at least one new message,
the telephone base beeps every 10 seconds. By default, the message alert
tone is set to OFF.
To change the setting:
1. Press in idle mode to enter the
main menu.
2. Press or to scroll to Answering sys, then
press .
3. Press or to scroll to Ans sys setup, then
press .
4. Press or to scroll to Msg alert tone, then
press .
5. Press or to choose On or O.
6. Press to save your setting.
NOTES:
• The message alert tone beeps only if all the following conditions are met:
– The answering system is on.
– The message alert tone is on.
– There are new messages.
• To temporarily turn o the message alert tone, see Temporarily turn o the message alert
tone on page 63.
Msg alert tone
ECO
Off
ECO