68
Answering system
Message window displays
The message window on the telephone base displays the total number of
messages. See the following table for other message window displays.
0 There are no messages in the answering system.
0
(ashing)
Aer a power failure, the number in the message window ashes
to indicate that the date and time need to be set.
1-99 • Total number of messages and memos.
• Current message number during old message playback.
1-99
(ashing)
• Total number of new messages and memos. The number
ashes when there are new messages that have not been
reviewed.
• Current message number during new message playback.
• Aer a power failure, the number in the message window
ashes to indicate that the date and time need to be set.
1-99 and F
(alternating)
Memory is full. Messages must be deleted before new messages
can be recorded.
-- • The answering system is being programmed by a system
handset.
• The answering system is answering a call or recording a memo
or announcement.
• The answering system is being accessed remotely.
• The directory or caller ID log is being accessed by a system
handset.
0-6 Telephone base ringer volume while adjusting.
1-8 Speaker volume level of the telephone base while adjusting.
To Next Page
Loading...
Need help?
General
