27
Telephone operation
Options while on calls
To access the redial list while on a call:
1. Press . The screen shows the number most
recently called. To view up to 10 recently called numbers,
press , or repeatedly to scroll to
the desired number.
2. Press . The handset dials the displayed number.
NOTES:
• While on a call, you cannot edit a directory entry or redial entry, or copy a caller ID entry into
the directory.
• If the directory, caller ID log or answering system is being used and you attempt to access one
of them, the screen shows Not available.
• Press to exit directory, caller ID log or redial list and return to the call without
dialing the displayed number.
Join a call in progress
If a handset is already on a call and you would like to join the call:
Press or on another system handset.
To end the call:
Press or place the handset in the telephone base or charger.
The call does not end until all handsets hang up.
NOTES:
• If you have registered a cordless headset or cordless speakerphone to the telephone base,
you can also join a call in progress using the registered device. Refer to the user’s manuals of
your cordless headset or speakerphone for more information.
• You can use a maximum of four devices at the same time on an outside call. If you have
ve handsets and the h handset attempts to join the call, the handset screen shows
Unable to call.
Redial 6/10
888-722-7702
ECO
To Next Page
Loading...
Need help?
General
