53
Answering system
Answering system settings
To record a new announcement:
1. Press in idle mode.
2. Press or to scroll to Answering sys,
then press .
3. Press to select Announcement. The
system announces, “To play, press 2. To record, press 7.”
4. Press 7. The system announces “Record aer the tone. Press 5 when you
are done.”
5. Face the handset and speak towards the microphone to record your
announcement.
6. Press 5 when you nish the recording. The handset plays back the recorded
announcement.
NOTE: If the answering system memory is full, when you press 7 in Step 4, the answering
system announces, “Memory is full.” You must delete some messages before you can record a
new announcement. Refer to Message playback on pages 64-66.
To delete your announcement:
1. Press in idle mode.
2. Press or to scroll to Answering sys, then press .
3. Press to select Announcement. The system announces, “To
play, press 2. To record, press 7.”
4. Press 2 to play the current announcement from the speakerphone.
5. Press 3 during playback to delete your recorded announcement. The
system announces, “Announcement deleted.”
If your announcement is deleted, calls are answered with the default
announcement, “Hello. Please leave a message aer the tone.”
Recording... Stop
[5]
ECO
To Next Page
Loading...
