13
Set date/time
The answering system announces the day of the week and time of each message
received prior to playing it. If you subscribe to caller ID service, the day, month and
time are set automatically with each incoming call. However, the year must be set so
that the day of the week can be calculated from the caller ID information.
1. Press MENU/SELECT in idle mode to enter the main menu.
2. Press
CID or
DIR to scroll to Set date/time, and then press
MENU/SELECT.
3. Press
CID or
DIR to select the month, then press
MENU/SELECT, or enter the 2-digit number (01-12) using the
dialing keys (0-9).
4. Press
CID or
DIR to select the day, then press
MENU/SELECT, or enter the 2-digit number (01-31) using
the dialing keys (0-9).
5. Press
CID or
DIR to select the year, or enter the 2-digit
number (00-99) using the dialing keys (0-9), then press
MENU/SELECT.
6. Press
CID or
DIR to select the hour, then press
MENU/SELECT, or enter the 2-digit number (00-23) using
the dialing keys (0-9).
7. Press
CID or
DIR to select the minute, then press
MENU/SELECT, or enter the 2-digit number (00-59) using
the dialing keys (0-9).
8. Press
CID or
DIR to choose AM or PM. Press MENU/SELECT to save.
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH:MM -
-
ECO