25
25
Answering system and voicemail
voicemail (fees may apply). Your telephone’s built-in answering system messages and
X If XX new messages displays on the handset and the message window on
answering system. If you turn on Msg alert tone, the telephone base beeps every
10 seconds when there are new answering system messages. To listen to your
message(s), press MENU/SELECT twice on the handset (page 27) or press
PLAY/STOP
on the telephone base (page 27).
X If
and New voicemail display on the handset, your telephone service provider
is indicating that it has new voicemail for you. To listen to your voicemail, dial an
access number provided by your telephone service provider, followed by a security
code or PIN.
Some service providers bundle or combine multiple services like voicemail and call
waiting, so you may not be aware that you have voicemail. To check what services you
have and how to access them, contact your telephone service provider.
You can use the telephone answering system and voicemail together by setting
your built-in answering system to answer before voicemail answers. Refer to Using
the answering system and voicemail together in the online user’s manual for
instructions.
ANS ON key on the
telephone base or through the menu in the handset.
NOTE:
telephone base, but you can only use the handset to change the other answering system
settings.
Announcement
The announcement is the greeting callers hear when calls are
answered by the answering system. The telephone has a default
announcement. You can use this announcement, or record your
own announcement up to 90 seconds.
1. Press MENU/SELECT in idle mode.
2. Press
CID or
DIR to scroll to Answering sys, then press
MENU/SELECT.
3. Press MENU/SELECT again to select Announcement. Follow the
screen and voice prompts to record a new announcement.
Answering sys
ECO
Announcement
ECO
To Next Page
Loading...
Need help?
General
