22
Call block
If you have subscribed to caller ID service, you can use the call block feature to reject
certain calls automatically. The call block list stores up to 150 entries. The telephone
system can reject calls automatically according to:
X Numbers saved into the call block list
X Incoming calls without numbers
This feature is only available on the cordless handset.
Add a call block entry
1. Press MENU/SELECT when the handset is idle.
2. Press
CID or
DIR to scroll to Call block, then press MENU/SELECT.
3. Press MENU/SELECT again to choose Block list.
4. Press
CID or
DIR to scroll to Add new entry, then press MENU/SELECT.
5. When the screen displays Enter number, use the dialing keys to enter a number
(up to 30 digits).
X Press
CID or
DIR
X Press and hold REDIAL/PAUSE to enter a 3-second dialing pause (a P appears).
X Press DELETE to erase a digit.
X Press and hold DELETE to erase all digits.
-OR-
Copy a number from the redial list by pressing REDIAL/PAUSE. Then, press
CID or
DIR or REDIAL/PAUSE
MENU/SELECT to copy the number.
6. Press MENU/SELECT to move on to the name.
7. When the screen displays Enter name, use the dialing keys to enter a name (up to
15 characters). Press a key repeatedly until the desired character appears.
X Press
CID or
DIR
X Press 0 to add a space.
X Press DELETE to erase a character.
X Press and hold DELETE to erase all characters.
8. Press MENU/SELECT to store your call block entry.
To Next Page
Loading...
Need help?
General
