EasyManuals Logo

AT&T EL52219 Quick Start Guide

AT&T EL52219
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
33

X Make sure the power cord is plugged in correctly and securely.
X Make sure the battery is installed correctly in the handset. Follow the instruction in
Battery installation on pages 4-5 to install the battery.
X Unplug the electrical power. Wait for 15 seconds, then plug it back in. Allow up to
one minute for the cordless handset and telephone base to reset.
X Clean the cordless handset and telephone base charging contacts each month
using a pencil eraser or cloth.
I get noise, static, or weak signals even when I’m near the telephone base.
X If you subscribe to high-speed Internet service (DSL - digital subscriber line)

line cord and the telephone wall jack (see Installation on page 2
prevents noise and caller ID problems caused by DSL interference. Please contact

X Other electronic products such as HAM radios and other DECT phones, can cause
interference to your cordless telephone. Try installing your telephone as far away
as possible from these types of electronic devices.
X Do not install this telephone near a microwave oven or on the same electrical outlet.
You may experience decreased performance while the microwave oven is operating.
X If your telephone is plugged in with a modem or a surge protector, plug the

solve the problem, relocate your telephone or modem farther apart from one

X Relocate your telephone to a higher location. The telephone will likely have better
reception when installed in a high area.
X If the other telephones in your home are having the same problem, the problem
is in your wiring or telephone service. Contact your telephone service provider
(charges may apply).
I experience poor sound quality when using the speakerphone.
X For increased sound quality while using the speakerphone, place the handset on a

X When using a speakerphone, controlling background noise in your environment is
essential. While you are listening to your party, press MUTE to temporarily turn your
MUTE again to
turn the microphone on.
X Excessive background noise will cause a speakerphone to fade in and out. Try

speakerphone. Also, try to avoid interrupting the person at the other end of the
conversation while they are speaking. If background noise cannot be controlled,
you should terminate speakerphone operation and return to normal handset
mode.

Other manuals for AT&T EL52219

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AT&T EL52219 and is the answer not in the manual?

AT&T EL52219 Specifications

General IconGeneral
BrandAT&T
ModelEL52219
CategoryCordless Telephone
LanguageEnglish

Related product manuals