AT&T GL2101-2 - Telephone Settings; Handset Settings; Ringer Volume; Ringer Tone

15
Telephone settings
Handset settings
Ringer volume
You can select the ringer volume for incoming calls. A ringer
o icon shows when the volume is set to o.
To set the ringer volume:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press MENU/SELECT to select Home volume.
4. Press CID or DIR to sample each ringer volume for
home line.
5. Press MENU/SELECT to save.
Notes:
f Changing the handset ringer volume does not aect base ringer volume.
f If the ringer volume is set to o, that handset or the telephone base is silenced for all
incoming calls.
f The ringer volume level also determines the ringer levels of intercom calls.
Ringer tone
You can select the ringer tones for incoming calls.
To set the ringer tone on home line:
1. Press MENU/SELECT in idle mode.
2. Press CID or DIR to highlight Ringers, then press
MENU/SELECT.
3. Press CID or DIR to select Home ringtone, then press
MENU/SELECT,
4. Press CID or DIR to sample each ring tone for home line.
5. Press MENU/SELECT to save.
Note: When you turn o the ringer volume, you will not hear ringer tone samples.
Home volume
ECO
Volume:
ECO
Ringers
ECO
Home ringtone
ECO
Tone: 1
ECO
Ringers
ECO