AT&T GL2101-2 User Manual

26
Telephone operation
Redial
Save a redial entry to the directory
1. Press REDIAL on the handset or telephone base in idle mode.
2. Press CID, DIR or REDIAL repeatedly to browse until the desired number
displays.
3. Press MENU/SELECT twice.
4. The screen displays Enter number. Use the dialing keys to edit the number, if
necessary.
f Press CID or DIR to move the cursor to the le or right.
f Press DELETE on the handset to erase a digit.
f Press and hold DELETE on the handset to erase all digits.
f Press and hold PAUSE to insert a three-second dialing pause (a P
appears).
5. Press MENU/SELECT.
6. The screen displays Enter name. Use the dialing keys to enter a name
(up to 15 characters). Press a key repeatedly until the desired character
shows on the screen (see Character chart on page 34).
f Press CID or DIR to move the cursor to the le or right.
f Press 0 to add a space.
f Press DELETE on the handset to erase a character.
f Press and hold DELETE on the handset to erase all characters.
7. Press MENU/SELECT. You hear a conrmation tone.
Delete a redial entry
1. Press REDIAL in idle mode.
2. Press CID, DIR or REDIAL repeatedly to browse until the desired number
displays.
3. Press DELETE on the handset to delete the displayed number. You hear a
conrmation tone.

AT&T GL2101-2 Specifications

General

Brand	AT&T
Model	GL2101-2
Category	IP Phone
Language	English