AT&T GL2101-2 User Manual

51
Call block
Call block settings
Save a caller ID log entry to the call block list
1. While reviewing the caller ID log, press CID or DIR to browse through the
caller ID log.
2. When the desired entry displays, press MENU/SELECT.
3. Press CID or DIR to choose To Call block, then press MENU/SELECT.
4. When the screen shows Enter number, use the dialing keys to modify the
telephone number (up to 30 digits), if necessary.
X Press CID or DIR to move the cursor to the le
or right.
X Press and hold PAUSE to enter a 3-second dialing pause (a P appears).
X Press DELETE to erase a digit.
X Press and hold DELETE to erase all digits.
5. Press MENU/SELECT to save the number in the display. The screen shows
Enter name.
6. Use the dialing keys and refer to Character chart on page 34 to modify
the name (up to 15 characters), if necessary.
X Press 0 to add a space.
X Press CID or DIR to move the cursor to the le or right.
X Press DELETE to erase a character.
X Press and hold DELETE to erase all characters.
7. Press MENU/SELECT to save. You hear a conrmation tone.
Note: The screen shows Number repeated if the number is already in the call block list. You cannot save the same
number more than once.

AT&T GL2101-2 Specifications

General

Brand	AT&T
Model	GL2101-2
Category	IP Phone
Language	English