AT&T GL2101-2 User Manual

31
Multiple handset use
Call transfer using intercom
While on an outside call, you can use the intercom feature to transfer the call
from one device to another.
To transfer an outside call using intercom:
1. When on an outside call, press MENU/SELECT.
2. Press CID or DIR to highlight Intercom, then press
MENU/SELECT. The call is automatically put on hold.
3. Press CID or DIR to select a device. The handset shows
Calling HS X (X represents the handset number). The
destination device rings and shows HS X is calling.
4. To answer the intercom call on the other handset, press
PHONE/FLASH or /SPEAKER on the destination
handset. T he outside call is still on hold. Both devices now
show Intercom.
5. To transfer the call, press OFF/CANCEL or place the handset
back in the telephone base or charger. The other handset
automatically connects to the outside call.
- OR -
The called party can end the intercom call by pressing
OFF/CANCEL or by placing the other handset back in the
telephone base or charger. The outside call continues with
the originating handset.
Notes:
f If you want to cancel an intercom call and reconnect to the outside call before the
destination handset answers, press OFF/CANCEL on the originating handset.
f If the called device does not answer the intercom call within 100 seconds, or if the device
is in use, on a call or out of range, the initiating handset displays Unable to call, and
returns to the outside call.
f You can press OFF/CANCEL or MUTE on the destination handset to temporarily
silence the intercom ringer.
f Only one intercom call can be established at a time.
Home 0:01:30
ECO
10:30
PM
11/20
Calling HS X
ECO
10:30
PM
11/20
Intercom
ECO
10:30
PM
11/20
Intercom
ECO
Handset 1
ECO

AT&T GL2101-2 Specifications

General

Brand	AT&T
Model	GL2101-2
Category	IP Phone
Language	English