The MERLIN System Voice Terminal
1.
Adjust the volume of your voice terminal’s speaker and
5. Program custom features onto available buttons.
ringing by using the volume control.
6.
Use
Conference, Drop, Transfer,
and
Hold
for efficient
2. Test your voice terminal and program custom features
call-handling.
with the T/P (Test/Program) switch.
7. Touch Speaker for On-Hook Dialing and Group
3. Touch Intercom and dial a 2-digit number to contact
Listening.
others connected to your MERLIN system.
8.
Use
Recall
to disconnect a call or for PBX and Centrex
4.
Use line buttons to call people who aren’t connected to
features.
your MERLIN system.
Read about your
MERLIN
system’s fixed features on pages 6-7,
and custom features on pages 8-13.
3
To Next Page
Loading...
