Using the Phone
lnside—Voice-
Signaled:
[
Intercom
] + [
★
] +
Extension Number
■
■
■
To voice-signal a system phone at the extension, press
[
★
] plus the two-digit extension number:
If you hear one beep, you have reached an idle
system phone. You can speak after the beep. Your
voice is heard through the other extension’s speaker. If
the recipient is present, he or she can reply.
If you hear two beeps, you have reached a busy
system phone with Voice Interrupt On Busy assigned.
You can speak after the beeps. Be aware that the
third party to whom the recipient is speaking will
probably also hear the two beeps and the faint sound
of your voice. If the recipient has a Voice Interrupt On
Busy Talk-Back button, wait for a response.
If you hear ringing, you have reached an idle
standard, MLC-6, MDC 9000, or MDW 9000 phone,
or a busy system phone with Voice Interrupt on Busy
not assigned. Your call is not completed until
someone answers.
■
■
At Your Extension:
[
Line
] or [
Pool
]
[
Hold
] +
[
Line
] or [
Pool
]
Answering a Call
You can answer a call on any line or pool*
that is ringing, or select a specific line or
pool if more than one is ringing:
When the telephone is ringing, lift the handset.
To answer a call on a specific line or in a specific pool,
press the button for the line or pool you want to answer,
then lift the handset.
If you are already on a call:
Press [ Hold ] to put the first call on hold.
Press the line or pool button next to the flashing light to
pick up the new call.
To answer a voice-signaled call (your phone
beeps):
If the microphone is on, begin speaking (if not, press
[
Mic ] or lift handset).
To respond to a voice interrupt on busy call
(you hear two beeps through your phone's
handset):
Press the Voice Interrupt On Busy Talk-Back button,
begin speaking, then press the button again.
1
2
1
1
* Pool buttons apply only to PARTNER II systems in Hybrid mode.
12
To Next Page
Loading...
Need help?
General
