Using the Phone
[
Hold
] + Password
Entering a Password
Before lifting the handset or pressing [ Spkr ], press [ Hold ]
and enter the four-digit password.
[
Feature
] [
1
] [
2
] +
Account Code +
[
Feature
] [
1
] [
2
]
Entering an Account Code
While off-hook, dial [
Feature
] [
1
] [
2
].
Enter an account code of up to 16 digits (manually or
using an Auto Dial button or Speed Dial number). See
your System Manager for a list of account codes.
Dial [
Feature
] [
1
] [
2
].
Outside:
[
Line
] or [
Pool
] +
Phone Number
or
[
Intercom
] [
8
] +
Line Number +
Phone Number
or
[
Intercom
] +
Pool Access Code
+ Phone Number
Inside—Ringing:
[
Intercom
] +
Extension Number
Making a Call
To call an outside party:
If a password is needed, enter it before step 1. Also, to get
outside dial tone, you may have to enter an account code
before step 2. If this applies to your phone, contact your
System Manager for instructions.
You can lift the handset or press [
Spkr ] before dialing.
If desired, either:
■
Press an idle (not lit) line button. To dial on a line not
assigned to your phone, press [
Intercom ] [ 8 ] followed
by the line number.
■
Press an idle (not lit) pool* button. To access lines in
pools not assigned to your phone, press [
Intercom ]
followed by the pool access code (880-883).
Dial telephone number.
To call another extension:
You can lift the handset or press [ Spkr ] before dialing.
1
1
2
3
1
2
1
2
Press an idle [
Intercom ] button.
You hear intercom dial tone, and the light next to the
[
Intercom ] button is steady green.
To ring the extension, dial the two-digit extension
number.
* Pool buttons apply only to PARTNER II systems in Hybrid mode.
11
To Next Page
Loading...
Need help?
General
