Dial-Code Features
Feature
To Use
To Use
Description
Manually
Button
Privacy
Prevents others from joining your
calls. To use, program [
Feature ] [ 0 ]
[
7 ] on a button with lights.
Not available Press the button
to turn on and off
Recall
“Recalls” dial tone when you are on
Dial [
Feature
] [
0
] [
3
]
Press the button
a call, to access a PBX or Central
Office service.
Save Number Redial
Saves the last outside number you
dialed into memory (but not a
System Speed Dial number). Save
a number before you hang up; the
number stays in memory until a new
one is saved.
Dial [
Feature
] [
0
] [
4
]
before hanging up
to redial later, dial
[
Feature
] [
0
] [
4
] again
Press the button
before hanging up
to redial later, press
the button again
Simultaneous Paging
Connects you to the loudspeaker
Dial [
Intercom
] [
★
] [
7
]
Press the button
paging system and idle system
[
0
]
phones with speakers in Calling
Group 1.
Touch-Tone Enable
Sets to touch-tone dialing for the
rest of a call.
Dial [
Feature
] [
0
] [
8
]
Press the button
VMS Cover
Turns voice mail coverage on and
off. To use, program [
Feature
] [
1
] [
5
]
on a button with lights.
Voice Interrupt on Busy Talk-Back
Lets you respond to a voice
interrupt on busy call. To use,
program [ Feature ] [ 1 ] [ 8 ] on a button
with lights.
Not available
Press the button
to turn on and off
Voice Mail Messages
Dials the voice messaging system
to check messages.
Not available
Press the button
to turn on and off
Dial [
Intercom
] [
7
] [
7
]
[
7
]
Press the button
Voice Mailbox Transfer
Transfers a cal directly to an
extension's voice mailbox, so a
caller can leave a message.
Dial [
Feature
] [
1
] [
4
]
+ Extension Number
Press the button +
Extension Number
Feature must be programmed onto a button with lights (see pages 2 and 5).
10
To Next Page
Loading...
Need help?
General
