Using the Phone
Making a Conference Call
To add parties to a call (max. 4 parties plus
you):
Telephone or
1
Extension Number +
[
Conf
] + [
Line
] or
[
Pool
] or [
Intercom
] +
2
Telephone or
3
4
5
1
1
2
Extension Number
+ [
Conf
]
Call the first party (can use Speed Dial or Auto Dial
buttons).
After the first party answers, press [
Conf ].
Press an idle line or pool* button and call the second
party (or press [
Intercom ] and extension number to add an
inside party).
After the second party answers, press [
Conf ] again; you
are connected with both parties.
The lights at all extensions in the conference flash red
and green.
To add others, repeat steps 2–4.
To drop the last outside party added to the call:
To Drop:
Press [ Feature ] [ 0 ] [ 6 ].
[
Feature
] [
0
] [
6
]
NOTE: You cannot add more than 2 outside parties, transfer
a conference call, join a conference call, or drop the first-
added party.
Joining a Call
To connect yourself to an outside call being
[
Line
]
conducted at another extension:
or
Press the line button next to the steady red light or dial
[
Intercom
] [
6
] [
8
]
[ Intercom ] [ 6 ] [ 8 ] and the two-digit line number.
+ Line Number
Lift handset.
NOTE: You cannot join an inside call, a conference call, or
a call at an extension with Privacy turned on. You cannot
join calls using pool buttons.
* Pool buttons apply only to PARTNER II systems in Hybrid mode.
15
To Next Page
Loading...
Need help?
General
