Telephone Buttons and Indicators
1
2
Display
[MLS-34D,
®
MLS18D,
®
and MLS-12D
®
only]
When dialing, shows the number dialed, duration of call, and feature messages.
When receiving an intercom call, shows the number (and name if programmed)
of the extension calling. When in programming mode, displays programming
messages. When not using the phone, displays today’s date and time, or Caller
ID information (if available—on PARTNER II system only). (You can adjust the
display contrast on the MLS-18D; see “Volume Control Buttons” on page 3.)
Line/Pool*/Programmable Buttons
A line or pool can be assigned on any button with status lights. (The MLS-34D and
MLS-18D have status lights for all of these buttons; the MLS-12D and MLS-12
®
are
identical to the MLS-18D, except that they do not have lights for the 6 buttons
shown above the white line.) If a line or pool is assigned, press the button to make
and receive calls. You may have to enter an account code to get an outside line
(see page 7).
If no line or pool is assigned, you can program the button with one-touch dialing
features (no status lights are required for most features). Then you can press the
button to dial a number or use the feature. Dial-code features are listed on pages
7–10; programming instructions are on page 5.
(NOTE:
The MLS-6
®
phone has 4
line/pool/programmable buttons. If all of the buttons are used for lines or pools, it
has no buttons left for dial-code features.)
* Pool buttons apply only to PARTNER II systems in Hybrid mode.
2
To Next Page
Loading...
Need help?
General
