Conference
Additional Conference Call Functions
●
●
●
You can place an entire conference call on hold by pressing the HOLD/PAUSE button.
You can go back to it by pressing any line button if it involves outside callers or
INTERCOM if there’s an inside person involved in the call.
You, as originator of a conference call, can drop a line by first pressing the RECALL/
DROP button and then the line button (or INTERCOM) you want to drop. The other
way is for the party to hang up. Note: If the outside party hangs up, the line will
not
be dropped from the call automatically.
NOTE: When one person (with the exception of the person who started the conference
call) drops out of a conference call the others remain connected. When you, as the
originator of the conference call, hang up, the call ends.
Additional information on conferencing can be found in The Administration Manual.
22
To Next Page
Loading...
