AT&T Spirit Communications System - Night Service and Auto Callback; Activating Night Service; Deactivating Night Service; Using Auto Callback (Intercom Only)

Do Not Disturb
Do Not Disturb
The Do Not Disturb feature is handy for those times when you do not want to be
disturbed for any reason. A deadline is only an hour away, a very important client is
meeting with you in your office, or you want to finally get through that stack of mail
without getting sidetracked.
To turn
off the ringer on your phone:
1.
2.
3.
ACTION
OUTCOME
Press the INTERCOM button.
Lift the receiver or press the
You will hear a dial tone and the
SPEAKER button.
intercom light will go on.
Dial “ ★ ” and “2.”
The light above the MUTE button will
blink ON and OFF as a reminder that
the Do Not Disturb feature is on. Your
phone will not ring for incoming,
transferred or intercom calls.
To turn the ringer back
on:
1. Press the INTERCOM button.
2. Lift the receiver or press the
You will hear a dial tone and the light
SPEAKER button.
will go on.
3. Dial “ # ” and “2”.
Your phone will ring for the next
incoming or transferred call.
NOTE: When your Do Not Disturb feature is in use, an outside caller will hear your
phone ring as usual. An inside caller will hear a busy signal.
26