Station Paging
Making An Announcement To All System Users
You desperately need to talk to Amelia, one of your co-workers. You’ve tried dialing her
intercom extension but there’s no answer. She must be somewhere in the building. You
can try paging her.
1.
2.
3.
4.
To make a station page:
ACTION
Press the INTERCOM button.
Lift the receiver and press the
SPEAKER button.
Dial “61.”
Make the announcement.
If your system has a loudspeaker paging system an you want the announcement to be
OUTCOME
You will hear a dial tone and the light
will go on.
You will be connected with the
intercom extensions of everyone in the
system.
Your announcement will be heard at
each station in the system except at
those which have the Do Not Disturb
feature
on.
made over the loudspeakers, follow STEPS 1-4 above except dial “60” instead of “61.”
Responding To A Page
Amelia, sitting in a colleague’s office, wants to respond to the voice heard on the
speakerphone.
ACTION
OUTCOME
1. Lift the receiver or press the You will be connected with the person
SPEAKER button at whatever
making the page. All other intercom
station you are.
extensions will be unable to respond to
the page as soon as one person lifts
the receiver or presses the SPEAKER
button. The call then becomes a
regular phone call, with nothing further
being heard over all system speakers.
23
To Next Page
Loading...
