AT&T TL88102 - Redial Features; Redialing a Number; Saving Redial Entries to Directory

25
Telephone operation
Telephone operation
To redial a number
Using the handset:
1. Press REDIAL/PAUSE when the handset is not in use.
2. Press qCID or pDIR to scroll to the desired number.
3. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER to dial.
Using the telephone base:
1. Press the REDIAL soft key and then press qCID or pDIR to scroll to the
desired number.
2. Press /LINE1 or /LINE2 to dial.
To save a redial entry to the directory
Using the handset:
1. Press REDIAL/PAUSE when the handset is not in use.
2. Press qCID or pDIR to scroll to the desired number, then press the SAVE
soft key.
3. The screen shows ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
4. Press the NEXT soft key to move to the name.
5. The screen displays ENTER NAME. Use the dialing keys to enter the name.
6. Press the SAVE soft key and Saved to Directory displays for a few
seconds.
Using the telephone base:
1. Press the REDIAL soft key when the telephone base is not in use.
2. Press qCID or pDIR to scroll to the desired number, then press the SAVE
soft key.
3. The screen shows ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
4. Press the NEXT soft key to move to the name.
5. The screen displays ENTER NAME. Use the dialing keys to enter the name.
6. Press the SAVE soft key and Saved to Directory displays for a few
seconds.