AT&T TL88102 - Using Speed Dial; Reviewing Speed Dial Entries; Dialing via Speed Dial

48
Directory
Speed dial
Review the speed dial entries
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press qCID or pDIR to scroll to DIRECTORY, then press
the SELECT soft key.
3. Press qCID or pDIR to scroll to Speed dial, then press
the SELECT soft key.
4. Press qCID or pDIR to browse.
Using the telephone base:
1. Press the MENU soft key when the telephone base is
not in use.
2. Press qCID or pDIR to scroll to Directory, then press
the SELECT soft key.
3. Press qCID or pDIR to scroll to Speed dial, then press the SELECT soft
key.
4. Press qCID or pDIR to browse.
Dial a speed dial entry
Using the handset:
1. When the handset is not in use, press and hold the dialing key (0-9)
corresponding to the assigned location you wish to call.
-OR-
Follow the steps in Review the speed dial entries above to select the
desired entry.
2. Press LINE 1/FLASH, LINE 2/FLASH or /SPEAKER to call.
Using the telephone base:
1. When the telephone base is not in use, press and hold the dialing key
(0-9) corresponding to the assigned location you wish to call.
-OR-
Follow the steps in Review the speed dial entries above to select the
desired entry.
2. Press /LINE 1 or /LINE 2 to call.
DIRECTORY
Review
Add contact
Speed dial
BACK
SELECT
Review
Add contact
Speed dial
SELECT