Multiple Handset use
32
Intercom
Use the intercom feature for conversations between a handset and the
telephone base or between two handsets. You can buy additional expansion
handsets (model TL88002) for this telephone system. You can register up to
12 handsets to the telephone base (page 76).
To initiate an intercom call with a handset:
1. Press INT when the handset is not in use.
2. When you have only one system handset, your handset shows Calling
base and the telephone base rings and shows Handset is calling.
-OR-
When you have more than one system handset, the
originating handset shows INTERCOM TO:, press qCID or
pDIR to select a destination and then press the SELECT
soft key.
If you are calling the telephone base, your handset
shows Calling base and the telephone base rings and shows Handset X
is calling.
If you are calling another handset, your handset shows Calling handset
X and the destination handset rings and shows Other handset is
calling or Handset X is calling.
To initiate an intercom call from the telephone base
1. Press the MENU soft key when the telephone base is not in use.
2. Press qCID or pDIR to scroll to Intercom and then press the SELECT soft
key.
3. When you have only one system handset, your telephone base shows
Calling handset and the handset rings and shows Base is calling.
-OR-
When you have more than one system handset, your
telephone base shows
INTERCOM TO:, p
ress
qCID or
pDIR
to select a destination handset and then press
the SELECT soft key. The telephone base shows Calling
handset X
. The destination handset rings and its screen shows Base is
calling.
To answer an intercom call at the handset:
Press LINE1/FLASH, LINE2/FLASH or INT to answer. Both screens show
Intercom.
To answer an intercom call at the telephone base:
Press /LINE 1 or /LINE 2. Both screens show Intercom.
•
•
•
•
INTERCOM TO:
BASE
Handset 2
BACK
SELECT
INTERCOM TO:
Handset 1
Handset 2
SELECT
To Next Page
Loading...
