AT&T TL88102 - Answering System ON;OFF; Turning Answering System On or Off

62
Answering system
Answering system settings
To delete your announcement
Using the telephone base:
1. Press the MENU soft key when the telephone base is not in use.
2. Press the SELECT soft key to select to select Answering sys.
3. Press qCID or pDIR to choose Mailbox 1 or Mailbox 2, then press the
SELECT soft key. The corresponding icon,
1
or
2, flashes on the
screen.
4. Press qCID or pDIR to scroll to Ans sys setup, then press the SELECT soft
key.
5. Press qCID or pDIR to scroll to Announcement, then press the SELECT
soft key.
6. The telephone base announces, “To play, press 2. To
record, press 7.” Press 3 to delete your own recorded
announcement. The telephone base announces,
“Announcement deleted.”
Using the handset:
1. Press the MENU soft key when the handset is not in use.
2. Press the SELECT soft key to select ANSWERING SYS.
3. Press qCID or pDIR to choose Mailbox 1 or Mailbox 2, then press the
SELECT soft key. The corresponding icon,
1
or
2
, flashes on the
screen.
4. Press qCID or pDIR to scroll to Ans sys setup, then press the SELECT soft
key.
5. Press qCID or pDIR to scroll to Announcement, then press the SELECT
soft key.
6. The handset announces, “To play, press 2. To record,
press 7.” Press 3 to delete your own recorded
announcement. The handset announces, “Announcement
deleted.”
7. Press the BACK soft key to exit to the previous menu.
NOTE: When your announcement is deleted, calls are answered with the
preset announcement.
1
ANNOUNCEMENT
2-Play 3-Delete
7-Record
1
BACK
ANNOUNCEMENT
2-Play 3-Delete
7-Record