13
Getting started
Installation options
Wall mount to desktop installation
To change the telephone base to the desktop position, make sure that you firstmake sure that you first
unplug the telephone line cord and power adapter cord from the wall outlets
before you begin. In addition, to prevent possible damage, remove the handset
from the telephone base.
1. Remove the telephone base from the wall and untie the bundled telephoneuntie the bundled telephone
line cord and power adapter cord.
2. Press on the catches on both sides of the bracket (indicated by arrows below)
to unlock the telephone base from the bracket.
3. Pull the telephone base up to detach it from the bracket.
The catch on the side
of the telephone base.
To Next Page
Loading...
