11
Configuring DHCP
To configure DHCP, follow these steps after reaching Figure 4:
1. Select the radio button next to “DHCP” on Figure 4 and click OK to proceed to the DHCP set up window.
2. Select the DHCP options required by your ISP on Figure 5. Most ISPs do NOT require any of these values to be
set.
3. Press OK to save the new settings.
4. At the end of the setup, you will be asked to reboot to pick up the new configuration. After reboot, skip to the
section titled “Establishing VPN Connectivity” on page 20.
Figure 5: DHCP Settings
To Next Page
Loading...
