12
Configuring a Static IP Address
To configure a static IP address, follow these steps after reaching Figure 4:
1. Select the radio button next to “Static” on Figure 4 and click OK to proceed to the Static IP set up window.
2. Enter the Static IP information requested on Figure 6 and press OK to save the new settings. The Static IP
information is provided by your ISP.
3. At the end of the setup, you will be asked to reboot to pick up the new configuration. After reboot, skip to the
section titled “Establishing VPN Connectivity” on page 20.
Figure 6: Static IP Settings
To Next Page
Loading...
