3.
Connect the joystick supplied with your system. Plug its
cable into controller port 1
on
the right side of your console.
Turning Your System
On
and Off
When you turn
on
your
XE
system, its
bu
ilt-in game Missile
Command will appear
on
screen ready for you to begin play.
Make sure you have connected a joystick, then follow these
steps:
1.
Turn
on
your TV or monitor. If you're
us
ing a
TV
, select
channel
2 or 3, whichever
is
weaker
in
your area. Set the
channel selector
on
the back of your
XE
console to the
same
channel.
~-t
Channel Selector
2.
If you have connected any other peripherals (such as a
disk drive) to your system , turn those
on
now.
7
To Next Page
Loading...
