Note:
To
return
to
regular
TV
viewing ,
be
sure to move the
switch box setting
to
the
TV
position.
No Color
on
Screen
If your screen has
no
color, experiment with the brightness and
contrast controls. The problem may
be
that your video display
is
not adjusted correctly. If you '
re
using a
TV
with automatic
fine-tuning , turn off the automatic control
and
fine-tune manually.
No Game Sound
If
you
have
no
game sound , try turning
up
the volume
on
your
video display.
If
you
'
re
using a
TV
and the sound
is
distorted or
buzzing, adjust the
TV
's fine-tuning controls until both the sound
and picture are clear.
If the problem persists, a strong
TV
signal
may
be
broadcasting
on
the channel you selected. Select the
other channel
(2
if you're
on
3 and 3 if you're
on
2)
on
both the
TV
and
XE
console channel selectors.
It
Just Won't Work
If
you
experience operating problems that you can't resolve,
take your
XE
system to
an
authorized Atari service center.
For the location of the nearest center, call your Atari retailer
(or see
Customer Support at the end of this chapter).
Caring for
Your
XE Game System
Follow the guidelines
in
this section to ensure continuing
excellent performance from your
XE
game system.
• Set
up
your system
on
a sturdy, level surface away from
dust, grease, extreme temperatures, direct sunlight, mois-
ture, and high humidity.
• Avoid smoking near your system and keep liquids away
from the components.
• When you turn off your console,
waitat
least ten seconds
before
you
turn it
on
again. Always turn off your console
before inserting or removing a cartridge.
•
Turn
off your system before cleaning
it.
Clean only the out-
side of the components, using a soft, slightly damp, lint-free
cloth .
Do
not use cleansers, abrasives, or solvents.
•
To
ship or store your system, repack it
in
the original factory
packing materials.
19