-6-
ATC Electrical & Mechanical,
ATC House, Broomhill Drive, Tallaght, D24 EF99, Ireland
IE: 01 4678301, UK:0203 564 9164, Email sales@atc.ie
Mark the wall according to the dimensions given on the previous page for the correct
heater of your size. Drill the wall and insert the plastic wall anchors into the holes.
Mount the wall bracket using the screws provided ensuring that the screws are securely
holding the bracket to the wall and there is no movement in the bracket.
Note: Prior to drilling the wall, ensure there are no cables or pipes
within the wall.
After mounting the wall bracket ensure that the mounting screws are
fixed firmly to guarantee that the heater is safely mounted to the wall.
To mount the heater onto the wall, tilt the heater so the bottom holes in the rear of the
heater are aimed at the lower mounting hook and attach the heater on to the bracket
(A).
Rotate the heater towards the wall until the upper hooks enter the upper mounting
holes (B)
Push the heater down on the brackets (C) until a click is heard and the latch is in place.
To Next Page
