— 16 —
[M3] MENU
• MENU3 for vertical and horizontal circuits adjustment test, about
the method of adjustment test, see “5 Complete set adjustment test”.
·H-PHASE: adjustment test item of picture horizontal center.
·V-POSI: adjustment test item of picture vertical center.
·V-SIZE: adjustment test item of picture vertical amplitude.
·V-LIN: adjustment test item of picture vertical scan Non-linearity.
·V-SC: adjustment test item of picture vertical S calibration.
·OSD H DISPLAY: adjustment test item of D horizontal display
position .
[M4] MENU
•MENU4 for RF-AGF adjustment test, about the method of
adjustment test, refer to “5 Complete set adjustment test”.
·RF AGC: for RF-AGC adjustment test.
[M5]MENU
•
MENU5 for adjustment test of Screen/White balance/Sub
brightness, about the method of adjustment test, see “5 Complete set
adjustment test”.
·
When enter MENU5 adjustment test menu, CPU will automatically
set “Picture enhancement” to status of “closed”, color saturation to 0,
brightness to 50.
·
CL
→
Color saturation control
BT→Brightness control
CT→Contrast control
SB
→
Sub-brightness
·RB/GB/BB→Cutoff of red/green/blue gun
·RD/GD/BD→Excite of red/green/blue gun
[M6]MENU
•MENU6 for setting of color decode item.
·When enter MENU6 adjustment test menu, CPU will automatically
set “Picture” to status of “Standard”, and close “Picture enhancement”
setting.
·R/B BALANCE→R/B balance
R/B ANGLE→R/B decode and demodulation angles.
[M7]MENU
•MENU7
·When enter MENU7 adjustment test menu, CPU will automatically
set “Picture” to status of “Standard”, and close “Picture enhancement”.
·H blank L→Horizontal blanking (left)
MENU3
H-PHASE 11
V.POSI 28
V.SIZE 73
V.LIN 13
V.SC
5
OSD.H.DISPLAY 20
MENU4
RF-AGC 45
MENU5
CL 32
BT 48
CT 48
SC
RB 50
GB 50
BB 50
RD 60
GD 9
BD 60
SB 90
MENU6
R/B BALANCE 7
R/B ANGLE
7
MENU7
H blank L
4
H blank R
4
V . C O M P
7
H . F r e q
24
To Next Page