How to fix mouse pointer issues with Fedora on ATEN Switch CN8000A?
If the remote server is running Fedora and the mouse pointer doesn't move on the remote server when accessing it from the local console or a local client computer, and if the remote server is connected with a PS/2 cable, log into the CN8000A with a browser, open a viewer, and on the control panel set Mouse DynaSync to Manual.
Why is my ATEN Switch CN8000A operating erratically?
If you experience erratic operation with the CN8000A ATEN Switch, ensure that the CN8000A is started before the KVM switch. If the KVM switch was started before the CN8000A, reset or restart the KVM switch. If problems persist, reset the CN8000A.
What to do if the remote mouse pointer is out of step on my ATEN CN8000A?
If the remote mouse pointer is out of step when using the ATEN Switch, check the status of the Mouse DynaSync Mode setting. If it is set to Automatic, change the setting to Manual. If you are in Manual mode, use the AutoSync feature to sync the local and remote monitors. If that doesn't resolve the problem, use the Adjust Mouse feature to bring the pointers back in step. If the above fails to resolve the problem, refer to Additional Mouse Synchronization Procedures, for further steps to take.
Why doesn’t the Windows Client link appear in Firefox for my ATEN CN8000A?
If the Windows Client link isn’t appearing in the Remote Console Display when you log in with Firefox on your ATEN Switch, it's because the Windows Client link requires ActiveX, which Firefox doesn't support. Only the Java Applet is available in Firefox.
What to do if Java Applet won't connect to ATEN Switch CN8000A?
If the Java Applet won't connect to the CN8000A ATEN Switch, ensure that Java 6 Update 3 or higher is installed on your computer. Also, verify that you are including the correct login string when specifying the CN8000A's IP address. If the issue persists, close the Java Applet, reopen it, and try again.
How to sync local and remote mouse pointers on ATEN CN8000A Switch?
If the local and remote mouse pointers don't sync when using the ATEN Switch, the default configuration is for automatic syncing, which only supports USB mice on Windows and Mac (G4 or higher) systems. Select Manual as the Mouse DynaSync Mode and sync the pointers manually.
Why is the mouse movement extremely slow on my ATEN Switch?
If you find the mouse pointer movement extremely slow when using the ATEN Switch, it indicates that too much data is being transferred for your connection to handle. To resolve this, lower the video quality in the Video Settings to reduce the amount of video data being transmitted.
General| Sustainability certificates | RoHS |
|---|---|
| Product color | Black |
| Rack mounting | - |
| LED indicators | Yes |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 50 °C |
| Operating relative humidity (H-H) | 0 - 80 % |
| Console ports | USB B |
| Mouse port type | No |
| USB connector type | Mini-USB B |
| Number of computers controlled | 1 |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 81.4 mm |
| Height | 25 mm |
| Weight | 490 g |
Describes the CN8000A's key features and advantages for remote KVM access.
Details hardware and software requirements for server and client connections.
Covers user management, sessions, and maintenance for the CN8000A.
Configures device information, network, ANMS, security, and console settings.
Controls access, login policies, filters, and encryption for enhanced security.
Configures serial console access via OOBC or serial connection.
Sets the device's date, time, and time zone parameters.
Allows local drives/files to appear as remote, for installation and updates.
General safety guidelines for using the product.
Information on how to contact ATEN for technical assistance.
Step-by-step guide for installing the CN8000A device.
Create and manage user profiles with roles and permissions.
Steps to download and install firmware updates for the CN8000A.
Configures RADIUS server for authentication and authorization.
Modifies the AD Schema to include CN8000A attributes.
Details on OpenLDAP server setup and configuration.
Customizing the OpenLDAP configuration file (slapd.conf).
To Next Page
