CS1922 / CS1924 User Manual
10
7. (Optional) Plug your USB peripherals into the type A sockets in the USB
hub section.
8. Plug the power adapter (provided with this package) into the switch’s
Power Jack and then plug the other end into a DC power source.
9. Power on the computers.
Note: 1. By default, the switch links to the first computer that is powered
on.
2. The total cable length from the PC to monitor (including KVM)
cannot exceed 3 meters.
3. Choosing high quality cables helps to ensure that 4K UHD
(3840x2160 @ 60 Hz) or 4K DCI (4096x2160 @ 60 Hz)
resolutions can be reached.
To Next Page
Loading...
