What to do if USB devices are not responding on my ATEN CS1912 Switch?
If your USB devices are not responding when connected to the ATEN Switch, try the following: 1. **Reset USB Ports:** Unplug the device's USB cable from the USB port on the switch's rear panel, and then plug it back in. 2. **USB Reset Hotkey:** Use the USB Reset hotkey combination to reset the USB ports.
Why is my ATEN Switch behaving erratically?
If your ATEN Switch behaves erratically, there are several potential causes and solutions: * **Power:** Ensure the unit is receiving sufficient power. Use a DC 5V power adapter if you aren't already. If you are using one, verify it matches the system specifications, is properly plugged in, and functioning correctly. * **Keyboard/Mouse:** Try resetting the keyboard and mouse by unplugging their cables from the console ports and then plugging them back in. * **Computer Connection:** Check the cable connecting the switch to the computer to ensure it's properly connected. * **KVM Switch Reset:** As a last resort, power off all devices, including the KVM switch. Wait five seconds, then power everything back on.
General| Type | KVM Switch |
|---|---|
| Number of Ports | 2 |
| USB Ports | 2 |
| Audio Support | Yes |
| Number of Users | 1 |
| USB Peripheral Support | Yes |
| Dimensions (mm) | 120 x 70 x 28 |
| Operating Temperature | 0 to 50 °C |
| Storage Temperature | -20 to 60 °C |
| Humidity | 0 to 80% RH |
| Device Type | USB KVM Switch |
Introduces the CS1912/CS1914 KVMP Switch, detailing its functions and technology.
Lists the primary capabilities and technical features of the KVMP switch.
Outlines the necessary console and computer hardware for proper operation.
Step-by-step instructions for connecting the KVM switch and peripherals.
Visual guide illustrating the physical setup and connection points of the KVM switch.
Methods for switching between computers using front panel buttons or mouse scroll wheel.
Details on using keyboard hotkeys to control the KVM switch.
Hotkeys for selecting ports and enabling automatic port cycling for monitoring.
Guide to entering and configuring switch settings via the Hotkey Setting Mode.
Steps to prepare for updating the KVMP switch's firmware.
Instructions for running the firmware upgrade utility and confirming success.
Critical safety guidelines for the proper and safe use of the device.
Detailed technical data, including ports, dimensions, and environmental factors.
Solutions for common operational problems encountered with the KVMP switch.
To Next Page
