ATEN CS82U User Manual

Chapter 1. Introduction
3
Hardware Requirements
Console
 A VGA compatible monitor capable of the highest possible resolution
 A USB or PS/2 mouse
 A USB or PS/2 keyboard
Computers
The following equipment must be available on each computer:
 A VGA port
Note: The quality of the display is affected by the quality of the VGA
display card. For best results, we recommend you purchase a high
quality product.
 Type A USB ports or 6-pin Mini-DIN PS/2 ports
Cables
Only KVM cable sets which are specifically designed to work with this switch
may be used to link to the computers. Two (CS82U) or four (CS84U) cable sets
are provided with this package. To order further cable sets, please see table,
below:
Note: The quality of the display is affected by the quality and length of the
cables. If you need additional cable sets, please contact your dealer to
purchase the appropriate ones for your switch.
Connectors Length Part Number
USB, PS/2 1.2 m 2L-5301UP
USB, PS/2 1.8 m 2L-5302UP
USB, PS/2 3 m 2L-5303UP
cs82u-cs84u.book Page 3 Monday, February 6, 2012 4:31 PM

ATEN CS82U Specifications

General

DC-in jack	Yes
Console ports	PS/2, USB A, VGA (D-Sub)
USB connector type	USB Type-A
Number of computers controlled	2
Built-in display	No
Product color	Black, Light grey
Housing material	Metal
HD type	QXGA
Scan interval	3, 5, 10, 20 s
Video bandwidth	60 Hz
Maximum resolution	2048 x 1536 pixels
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	0 - 80 %
Power source	DC
Power consumption (typical)	1.1 W
I/O ports	2x SPHD-18

Weight and Dimensions

Depth	140 mm
Width	88 mm
Height	55.5 mm
Weight	540 g