ATEN CS82U - Alternative Manual Port Selection Settings; Keyboard and Mouse Reset (CS84 U Only)

Chapter 3. Basic Operation
13
Alternative Manual Port Selection Settings
When Hotkey Setting Mode has been activated, pressing [S] will invoke the
alternative front panel pushbutton manual port selection functions as follows
(see page 21, also):
 Press a port selection pushbutton once to bring the KVM focus to the
computer attached to its corresponding port.
 Press and hold port selection pushbuttons 1 and 2 for more than 2 seconds
to start Auto Scan Mode, see page 16 for details.
 Press port selection pushbuttons 3 and 4 simultaneously for 2 seconds to
perform a keyboard and mouse reset (CS84U only).
cs82u-cs84u.book Page 13 Monday, February 6, 2012 4:31 PM