Why is there no remote server video display on the client computer using ATEN Switch?
If there's no remote server video display on the client computer, check that your KVM Adapter Cable’s firmware version is the same as the version stored in the switch’s Main firmware. Also, set the remote server resolution to 1280 x 1024 or less.
How to set a fixed IP address for ATEN KL1108VN / KL1116VN?
If the ATEN KL1108VN / KL1116VN is using DHCP but your network uses fixed IP addresses, use the local console OSD’s F4 function to assign the KL1108VN / KL1116VN a fixed IP address.
How to sync mouse pointers on Mac with ATEN KL1108VN Switch?
If the local and remote mouse pointers don't sync when logging in with your Mac system, try the 'Mac 2' setting.
How to sync mouse pointers on Sun system with ATEN Switch?
If the local and remote mouse pointers do not sync when logging in with your Sun system, you must sync the pointers manually, because Automatic Mouse DynaSync only supports USB mice on Windows and Mac (G4 or higher) systems.
To Next Page
General
