How to fix Lock Key LEDs on Control Panel not reflecting keyboard status on ATEN Switch?
If the Lock Key LEDs on the Control Panel don’t accurately reflect the actual locked status of your keyboard input, click the LEDs on the Control Panel until they match your keyboard.
How to resolve mouse pointer confusion on ATEN KN1108VA Switch?
To resolve mouse pointer confusion, use the Toggle Mouse Display function to shrink the non-functioning pointer.
What to do if I experience sudden loss of network connection with ATEN Switch?
If you experience a sudden loss of network connection, close your connection to the KVM over IP switch. Wait approximately 30 seconds, and log in again.
What to do if the display on the client computer is distorted on ATEN KN1108VA Switch?
If the display on the client computer is distorted and performing an Autosync doesn’t resolve the problem, switch ports to a port with a different resolution, then switch back.
Why does ATEN KN1108VA appear to use old firmware after upgrading and logging in with Java Client?
If, after upgrading the firmware, after logging in with the Java Client Viewer or the Java Client AP, the switch appears to still be using the old firmware version, log out and delete your Java temporary internet files.
How to fix ATEN Switch KN1108VA / KN1116VA still using old firmware after upgrade?
If, after upgrading firmware, the KN1108VA / KN1116VA still appears to be using the old firmware version, clear your browser cache; delete all temporary Internet files and cookies, close the Internet browser, and then open a new instance of the browser.
Why Virtual Media doesn’t work with ATEN KN1108VA?
If Virtual Media isn’t working, the remote server’s mainboard may not support USB. Get a newer firmware and BIOS version for the remote server’s mainboard that supports USB.
How to sync local and remote mouse pointers with Sun system on ATEN KN1108VA Switch?
Automatic Mouse DynaSync sync only supports USB mice on Windows and Mac (G4 or higher) systems, you must sync the pointers manually.
How to sync local and remote mouse pointers with Linux system on ATEN KN1108VA Switch?
Automatic Mouse DynaSync sync only supports USB mice on Windows and Mac (G4 or higher) systems, you must sync the pointers manually.
How to configure fixed IP address on ATEN Switch KN1108VA / KN1116VA?
If the default network setting for the KN1108VA / KN1116VA is DHCP, but the network uses fixed IP addresses and doesn’t have a DHCP server, use the local console OSD’s F4 function to give the KN1108VA / KN1116VA a fixed IP address.
General| Device Type | KVM switch |
|---|---|
| Number of Ports | 8 |
| Video Resolution | 1920 x 1200 @ 60Hz |
| Audio Support | Yes |
| Number of Local Users | 1 |
| Number of Remote Users | 1 |
| Form Factor | 1U |
| Power Consumption | 18W |
To Next Page
