How to sync local and remote mouse pointers when logging in with Windows system on ATEN KN1108VA Switch?
If, when you log in with your Windows system, the local and remote mouse pointers do not sync: 1. Check the status of the Mouse Sync Mode setting. 2. If you are in Manual mode, use the AutoSync feature.
What to do if I can't log in to ATEN KN1108VA Switch with my account?
If you have been given an account but you are unable to log in: 1. Make sure that you have correctly specified your Username and Password. 2. Make sure that the administrator has given you the necessary permission to access the switch. 3. Ask your administrator to see if the switch is under CC management.
Why does my browser generate a CA Root certificate is not trusted error when logging into ATEN KN1108VA Switch?
If, when you log in, the browser generates a CA Root certificate is not trusted, or a Certificate Error response, it is because the certificate’s name is not found on Microsoft’s list of Trusted Authorities. The certificate can be trusted.
What to do if keyboard and/or mouse do not work after computer boots up with ATEN Switch?
For computers with PS/2 connectors, if you are using 2L-520xP cables, make sure that all the connectors (keyboard, video, and mouse) are plugged into their ports on the computer before starting the computer.
General| Device Type | KVM switch |
|---|---|
| Number of Ports | 8 |
| Video Resolution | 1920 x 1200 @ 60Hz |
| Audio Support | Yes |
| Number of Local Users | 1 |
| Number of Remote Users | 1 |
| Form Factor | 1U |
| Power Consumption | 18W |
To Next Page
