ATEQ D6 Series User Manual

57 / 93
FG_D6_CCLINK_EN_02 / 2020-06-17
Function
Table of the function bits
Table of the function bits per program.
Reminder: “h” indicates a hexadecimal code, “(d)” indicates a decimal code.
The bits below are present in the FUNCTIONS menu of each program, if these have been previously
validated in the More functions... menu.
Word
Bit n°
Mask
Meaning
*ERD Only
Menu
Hexa
Dec
1
0
0001
1
Automatic mode.
Funct
1
0002
2
Reserved.
2
0004
4
Fill type activation.
Funct
3
0008
8
Recovery thresholds activation.
Funct
4
0010
16
Cycle end activation.
Funct
5
0020
32
End of cycle with reset and piezo
reset Activation.
Funct
6
0040
64
Cycle end with dump and reset
activation.
Funct
7
0080
128
Cycle end with fill activation.
Funct
8
0100
256
Peak hold activation.
Funct
9
0200
512
Pressure correction.
10
0400
1024
ΔP correction.
11
0800
2048
ATR1 activation.
Funct
12
1000
4096
ATR2 activation.
Funct
13
2000
8192
Chaining activation.
Funct
14
4000
16384
Pass part chaining activation.
Funct
15
8000
32768
Fail part maximum flow chaining
activation.
2
16
0001
1
Fail part minimum flow chaining
activation.
17
0002
2
Chaining with alarm activation.
Funct
18
0004
4
Pressure switch error chaining
activation.
Funct
19
0008
8
Cycle end chaining activation.
Funct
20
0010
16
Recovery chaining activation.
Funct
21
0020
32
Mini valve Activation.
22
040
64
Automatic connector activation.
Funct
23
0080
128
Valve codes activation.
24
0100
256
Valve 1 activation (external).
25
0200
512
Valve 2 activation (external).
26
0400
1024
Valve 3 activation (external).
27
0800
2048
Valve 4 activation (external).
28
1000
4096
Valve 5 activation (external).
29
2000
8192
Valve 6 activation (external).
30
4000
16384
Valve 7 activation (internal).
31
8000
32768
Valve 8 activation (internal).

ATEQ D6 Series Specifications

General

Brand	ATEQ
Model	D6 Series
Category	Test Equipment
Language	English