ATEQ D6 Series - Page 68

67 / 93
FG_D6_CCLINK_EN_02 / 2020-06-17
Identifier N°
Meaning
*ERD Only
Value
Dec
Hexa
414
019E
“YEAR”
Year configuration.
2000 > 9999
415
019F
“MONTH”
Month configuration.
1 > 12
416
01A0
“DAY”
Day configuration.
1 > 31
417
01A1
“HOUR”
Hour configuration.
0 > 59
418
01A2
“MINUTE”
Minute configuration.
0 > 59
419
01A3
“SECOND”
Second configuration.
0 > 59
477
01 DD
“REG. MODE”
Regulation mode
None
P(Auto)
P(Manu)
Flow
0000
1000
2000
3000
478
01 DE
“START INST.” (Reg mode menu)
Start pressure instruction in percent
0 > 1000
479
01 DF
“CONTINUOUS” (Reg mode menu)
Enable the permanent regulation during cycle
OFF
ON
480
01 E0
“INSTRUCT.” (Reg mode menu)
Flow instruction
- 9999 > 9999
481
01 E1
“GAIN” (Reg mode menu)
Coefficient of regulation
- 9999 > 9999
482
01 E2
“OFFSET UP” *
Flow offset during the “UP” step of an ERD program
- 9999 > 9999
483
01 E3
“OFFSET DOWN” *
Flow offset during the “DOWN” step of an ERD program
- 9999 > 9999
484
01 E4
“OVERSHOOT”
Enable overshoot on the regulation mode
OFF
ON
0000
1000
485
01 E5
“EXT. ACCES”
Security by external access (Fieldbus/Modbus)
Reset value with Modbus:
→ Writing at address 0xC1E5
Reset value with Fieldbus:
→ Writing one word with ID = 0xC1E5
Read/Write
Read Only
No Access
0000
1000
2000
486
01 E6
“OFFSET”
Offset Learning
- 9999 > 9999
487
01 E7
“MEAS. DELAY” *
Time to wait before launch measurement
0 > 650 seconds
488
01 E8
“PRESSURE” (Analog output menu)
Type of analog output for pressure
NONE
F.S.
0000
1000
489
01 E9
“FLOW” (Analog output menu)
Type of analog output for flow
NONE
F.S.
WINDOW
0000
1000
2000
490
01 EA
“TARGET” (Analog output menu)
Target flow value, middle value of the WINDOW mode
- 9999 > 9999
491
01 EB
“EXTENDED” (Analog output menu)
Used to calculate the max and min flow value of the WINDOW
mode depending on the TARGET value
- 9999 > 9999